Decorative strips made of stainless steel are also commonly used in home decoration. Most of the time, they are installed on the wall as background wall decoration or enclosure. It goes without saying that the most important part is installing the stainless steel trim. The problem of connection between stainless steel materials and other decorative strips is the installation methods of stainless steel decorative strips on walls.

How to install stainless steel decorative strips on the wall

1）First, prepare the decorative stainless steel strip, select the lines, and confirm that there are no scratches and bulges on the surface, and that the size is correct.

2）Check that the surface of the hinged base is securely fastened to the joint, if there are irregularities in the seam and it is well handled.

3）The self-adjusting positions of various decorative lines should be far away from people’s eye level, or placed in discontinuous positions in the room. In particular, the interface of the decorative metal lines is more obvious, and more attention should be paid to the arrangement of the matching positions of the decorative lines.

4）Begin by installing a strip of wood siding with round nails in the enclosed location. The width and thickness of the coated strip are slightly smaller than the inner diameter of the stainless steel.

5）Apply epoxy (all-purpose glue) to the wooden strips, apply epoxy to the stainless steel strips, and attach the wires to the wooden strips.

How to fix the stainless steel decorative strip on the wall

Embedding method:

1）Remove the groove-size decorative strip on the stone surface, and the depth can be determined as needed. The size of the decorative strip is larger than the panel size or tile size, and the depth of the groove is slightly deeper than the actual size.

2）Apply quartz glue to the stone channels and insert decorative stainless steel strips into the stone channels, determining the height and position of each.

3）After waiting a few minutes, if the marble glue is not completely dry, scrape off excess or spilled glue with a knife and wait for it to dry completely.

Floating method：

1）Apply marble glue directly to the bottom of the trim, ensure the size, and stick it to the stone surface. It is usually recommended to polish the glued location first using an angle grinder.

2）After waiting for a few minutes, if the marble glue is not completely dry, use a knife to scrape off the excess or spilled glue and wait for it to dry completely.